






KindPack WideBore Broth Spout Pouch
Wide-bore spout pouch that keeps thicker broths and chunky gravies flowing without clogging. Blank front panel, no brand on the pack.
Quality managementBRC
Packaging auditFDA
Food contactSEDEX
Ethical auditBSCI
Social compliance
Audited and compliant — see Quality Control for reports.
- Article No.
- KP-PF-031
- Category
- Wide-Aperture Spout Pouch for Broths and Gravies
- Material
- Mono-material PP spout-pouch direction
- Capacity
- 12 oz / 24 oz / 32 oz (340 ml / 710 ml / 946 ml)
Specifications
Structure & Closure
- Structure
- Wide-Aperture Spout Pouch for Broths and Gravies
- Closure
- Wide-bore screw cap suited to thicker liquids, with an optional flip-top dispensing cap
- Window
- A clear, unprinted film zone is possible so the fill level reads through the front panel; this is a material-transparency option rather than a separate window film, and it is to be confirmed against the mono-PP build
- Handle
- None. Not applicable to this retail format
- Valve or spout
- Welded screw-cap spout with tamper-evident ring; spout sizes and cap colours to be confirmed. This SKU is spout-only, with no degassing valve
Material & Build
- Material direction
- Mono-material PP spout-pouch direction
- Thickness
- 110-150 micron total
- Standard sizes
- 12 oz / 24 oz / 32 oz (340 ml / 710 ml / 946 ml)
Decoration
- Flexographic surface print, up to 8 stations, water-based inks; print area clear of the spout weld zone
- Finish
- Gloss body with a matte varnish band behind the front panel; no foil, no metallised layer
Commercial
- MOQ
- 5,000 pcs / SKU (first run)
- Lead time
- Sample: 12-18 business days; mass production: 30-45 business days
- Commercial terms
- Ex-works unit price and shipping terms to be confirmed on quotation
Additional
- Product Type
- Wide-Aperture Spout Pouch for Broths and Gravies
- Finished dimensions
- 12 oz / 24 oz / 32 oz (340 ml / 710 ml / 946 ml). Finished size W x H + bottom gusset (mm): 12 oz approx. 150 x 230 + 60; 24 oz approx. 190 x 280 + 70; 32 oz approx. 210 x 310 + 80.
- Environmental status
- Claim pending - not verified
About this product
WideBore solves clogging. The spout aperture is deliberately oversized for viscous gravies and small solid pieces, so richer formulations pour instead of sputtering. A fat-resistant sealant layer keeps grease from wicking into the seals at 32 oz, and a printed fill-level gauge lets the customer dose consistently across a four-week supply. Neon night-market graphics give broth and topper lines a late-night, street-food flavor appeal that stands apart from the earthy tones common in this category. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability or mono-material claim is validated for this SKU. The spout and cap are the critical unknown: a mono-material claim for the pouch body is meaningless unless the fitment is matched to the same polymer family and the pack is assessed as a whole. Hot-fill suitability, seal integrity and any recovery route must be tested. Wording stays at 'mono-material PP direction - whole-pack claim pending verification of the spout fitment'. Duties & taxes are not included in quoted prices.
For US and Canadian broth and topper brands where a narrow spout clogs on richer formulations; the wide aperture keeps chunky gravies flowing and supports a nighttime, urban-flavor positioning. Re-homed into the KP-ECO-005 family, the North America positioning holds: Built for the US and Canadian wet-food and topper shelf, where single-serve and multi-serve squeeze pouches are growing fastest in the cat aisle and in dog meal-mixer sets. The pouch stands and squeezes cleanly over a bowl, and the blank front panel leaves room for the buyer's brand plus a clean product-window read of the fill.
Key Features
Oversized spout aperture for viscous and chunky fills
Fat-resistant sealant direction for greasy formulations
Printed fill-level gauge for consistent dosing
Flip-top cap option for one-hand dispensing
Mono-material PP spout-pouch direction so body and fitment can follow one stream - claim pending verification
Decoration & Finishing
FAQ
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Request a Quote
Tell us quantity, size and target market — our team replies within one business day.
Send Inquiry