






KindPack VaultBarrier Foil Pouch
High-barrier foil pouch that shields nutrient-dense raw diets from light, oxygen and moisture. Blank front panel, no brand on the pack.
Quality managementBRC
Packaging auditFDA
Food contactSEDEX
Ethical auditBSCI
Social compliance
Audited and compliant — see Quality Control for reports.
- Article No.
- KP-PF-011
- Category
- Aluminum Foil High-Barrier Pouch
- Material
- Bio-based mono-PE with a valve and high-barrier direction
- Capacity
- 3 oz / 8 oz / 1 lb / 2 lb (85 g / 227 g / 454 g / 907 g)
Specifications
Structure & Closure
- Structure
- Aluminum Foil High-Barrier Pouch
- Closure
- Press-to-close zipper plus easy-tear notch above the seal
- Window
- None in the default build. A mono-material PE window is theoretically possible but the valve placement and the barrier requirement make it a to be confirmed special request only
- Handle
- None. Not offered on this retail-size format
- Valve or spout
- One-way degassing valve, welded or rivet-fitted, with a reinforcing patch; valve body material and recyclability compatibility to be confirmed. No drinking or pouring spout is offered
Material & Build
- Material direction
- Bio-based mono-PE with a valve and high-barrier direction
- Thickness
- 110-145 micron total
- Standard sizes
- 3 oz / 8 oz / 1 lb / 2 lb (85 g / 227 g / 454 g / 907 g)
Decoration
- Flexographic surface print, up to 8 stations, water-based inks, with a masked area reserved for the valve weld
- Finish
- Matte finish with a soft-touch hand feel; no foil and no metallic ink so the mono-material direction is preserved
Commercial
- MOQ
- 5,000 pcs / SKU (first run)
- Lead time
- Sample: 12-18 business days; mass production: 30-45 business days
- Commercial terms
- Ex-works unit price and shipping terms to be confirmed on quotation
Additional
- Product Type
- Aluminum Foil High-Barrier Pouch
- Finished dimensions
- 3 oz / 8 oz / 1 lb / 2 lb (85 g / 227 g / 454 g / 907 g). Finished size W x H + bottom gusset (mm): 3 oz approx. 130 x 190 + 45; 8 oz approx. 170 x 250 + 60; 1 lb approx. 200 x 290 + 70; 2 lb approx. 230 x 330 + 80.
- Environmental status
- Claim pending - not verified
About this product
VaultBarrier is built around preservation. A foil-bearing laminate creates a near-total block against light, oxygen and moisture, which matters most for freeze-dried raw, air-dried diets and omega-rich formulas where oxidation shortens shelf life and dulls palatability. The metallized face reads as protective on shelf, while a matte varnish panel keeps claim copy legible without glare. The bottom gusset supports 2 lb fills, and the tear notch sits above the zipper for a clean first open. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No bio-based content, recyclability, mass-balance, compostability or carbon claim is validated for this SKU. Bio-based share of the total pack, the bio-carbon content of the film, the effect of the valve body on any recovery route, and any mass-balance model are all unverified. Until declarations and an independent assessment are on file, the only permitted wording is 'bio-based PE direction - content and claim status under verification'. Duties & taxes are not included in quoted prices.
Designed for the US and Canadian freeze-dried and raw segment, where light, oxygen and moisture control drive repeat purchase and where a foil face signals preservation quality on shelf. Re-homed into the KP-ECO-004 family, the North America positioning holds: Aimed at the fast-growing US and Canadian freeze-dried raw and fresh-topper segment, where buyers look for a barrier pack with a degassing valve and want a material story they can defend. The 4 oz to 2 lb ladder covers trial, subscription and family formats, and the front panel stays blank for the buyer's brand.
Key Features
Foil-bearing laminate for light, oxygen and moisture blocking
Metallized face with a glare-free matte claim panel
Bottom gusset supports 2 lb fills
Clean first-open tear notch above the zipper
Bio-based PE film direction with a high-barrier route for raw and freeze-dried diets - claim pending verification
Decoration & Finishing
FAQ
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Request a Quote
Tell us quantity, size and target market — our team replies within one business day.
Send Inquiry